Foshan Yuebang Metal Building Material Co., Ltd.
Company Address: No. 7, Beisha Zhuyuan Industrial Zone, Lishui Town, Nanhai District, Foshan City
Contact: Li Bifu, Luo Liyu
Application of aluminum honeycomb panels:
(1) Building curtain wall exterior wall hanging board
(2) Interior decoration engineering
(5) Aviation manufacturing
(6) Indoor partition and commodity display stand
(7) Commercial transport vehicles and container truck bodies
(8) Buses, trains, subways and rail vehicles
(9) For the modern furniture industry with strict environmental protection requirements, the use of aluminum honeycomb panels to make furniture processing materials is a good material choice in the new century. Its completely non-toxic green quality allows furniture manufacturers to process In the case of furniture, unnecessary environmental protection procedures are eliminated; in addition, Yuebang aluminum honeycomb panel can be diversified such as solid wood, aluminum, gypsum board, natural marble, and can be made into honeycomb panels, and the material selection is convenient.
(10) Aluminum honeycomb panel partition: The appearance of aluminum honeycomb panel partition breaks the traditional traditional partition mode, and has won the market share of medium and high-grade office space with its noble, fresh and style.
Aluminum honeycomb panels have the following advantages:
(1) Fire prevention: The aluminum plate is a non-combustible material.
(2) Corrosion resistance: The aluminum honeycomb panel is treated with epoxy fluorocarbon and has strong corrosion resistance. The salt spray was sprayed for 48 hours without pinholes, cracks, and no bubbles.
(3) Environmental protection: Honeycomb panels are pure aluminum products, which do not volatilize any harmful gases, no radioactivity and can be completely recycled, 100% environmentally friendly products.
(4) The aluminum honeycomb panel is easy to disassemble and assemble, and the panel is not removed. Due to its light weight and convenient transportation, it can be transported to different places for repeated use. This is not comparable to other partition plates.
Common installation method for honeycomb panel curtain wall
(1) hanging ear
The installation method is that the lifting lug and the honeycomb panel are separated, and the lifting lugs are separately processed and connected to the seam position of the honeycomb panel, and the suitable width of the rubber seam is ≥12 mm. This installation method makes the processing simple and convenient to install.
This installation method is to process the installation of the aluminum honeycomb panel, that is, the installation has the installation flange, the installation only needs to comfort the connection and the keel and the glue joint, the suitable seam width is ≥10mm, the method is convenient to install, but the processing is slightly complicated. Not suitable for modeling curtain wall panels.
(3) buckle type
This node is aluminum buckle type, the buckle is a specific profile, the installation is simple, but this method has high requirements on the processing precision of the plate, and it is not recommended to use the plate with the length more than 3000mm. According to the width of the buckle, the seam in the plate is 20mm and 40mm.